RAPTOR – Continuous rotating pneumatic torque wrenches
TorcUP introduced the RAPTOR series of industrial pneumatic torque wrenches in 2008. This series provides continuous and repeatable torque with an accuracy of +/- 5 %. Unlike previous pneumatic torque wrenches, the RP series delivers fast speed when it matters, which is during actual bolting and not only during free nut run down! Inherent in all RAPTOR models, patented gear technology ensures great durability, low operational temperatures and increased efficiency. The gearboxes are capsuled and the trigger is easy to switch from right to left.
In comparison with impact wrenches and impulse drivers the RP delivers higher rotations per minute and a better power to weight ratio while still maintaining precise torque and causing less noise. Plug in air supply, set your desired torque and start bolting. It’s the perfect tool for quick and quiet bolting.
Plug-and-torque and hook-up-and-torque
- square drives from 3/4″ to 1 1/2″
- multi-position reaction arm and special reaction arms for many purposes
- torque ranges from 120Nm up to 8.200Nm (from 130ft/lbs up to 6.000ft/lbs)
- rotational speed reaches up to 44 rpm
- low air supply: max. 5-6,3 bar (72psi) for maximum torque / max. consumption 900 L / min
- 230 V 50 Hz standard electric supply for most EU-countries available
- accuracy: +/-5 %
- output accuracy: 100 %
- coolness factor: 100 %
technical data
| model | RP500 | RP1000 | RP2000 | RP3000 | RP6000 | RP8000 |
| max. torque [Nm] | 700 | 1.500 | 2.700 | 4.500 | 8.000 | 10.900 |
| effective length [mm] | 170 | 228 | 238 | 295 | 320 | 320 |
| gear box diameter [mm] | 65 | 72 | 79 | 93 | 120 | 127 |
| square drive [inch] | 3/4 | 1 | 1 | 1 | 1 1/2 | 1 1/2 |
| speed – loaded [rpm] | 48 | 30 | 20 | 5 | 3 | 2 |
| weight [kg] | 4 | 4,5 | 5,4 | 9 | 14 | 17 |
| operating pressure for 100% performance [bar] | 5,5 | 5 | 5,5 | 5 | 5 | 6 |
| inner connection thread [inch] | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Minimum air consumption 450 L/min. Effective length does not include the height of the square drive because it sits in the socket. Weight refers to the tool being ready for operation.
Our broad range of accessories for the RP series
- 5 dfferent standard reaction arms
- suspensions for balancing – vertical and horizontal, grips for the housing
- supporting tubes up to 1.000mm in length
- special elongated drives for narrow spaces
- lateral drives
